Highpoint RocketRAID 2302 Guida Utente Pagina 66
- Pagina / 81
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Linux Driver Support
1 – SuSE Linux Enterprise Server (SLES) installation
Overview
This section provides instructions describing how to install and utilize the
RocketRAID host adapter on a SuSE (SLES) Linux system.
2 - Installing SLES Linux on the RocketRAID 230x
Host Adapter
Note: If the OS is running kernel that differs from the one supported by the
precompiled driver, the precompiled drivers cannot be used. A driver can be built for
this kernel using the OpenSource package for the RocketRAID host adapter. This
package is available from our website, and is posted on the BIOS/Driver page for the
corresponding RocketRAID host adapter.
To install SLES onto hard disks or RAID arrays attached to RocketRAID host adapter,
follow the steps outlined below:
Step 1 Prepare the Driver Diskette
The driver is contained in a floppy diskette image file (slesdd.img).
On a DOS or Windows system, a driver diskette can be generated using rawrite.exe.
This utility is included on the SLES Linux CD (under /dosutils). Run rawrite using a
command prompt window, and follow the directions it provides.
On a Linux system, use the “dd” command to generate a boot diskette. Insert a
floppy disk into the floppy drive and type the following command:
# dd if=SLESdd.img of=/dev/fd0
Step 2 Install SLES Linux
1. Start the install procedure by booting from SLES installation CD.
5-10
- RocketRAID 230x 1
- SATAII Host Adapter 1
- Copyright 2
- Trademarks 2
- Table of Contents 3
- Chapter 1 5
- Introduction 5
- About this Guide 6
- Adapters 6
- Disk initialization 7
- Disk Status 7
- Array initialization 8
- Foreground initialization 8
- Background initialization 8
- Online RAID Level Migration 9
- Spare disk 9
- Legacy disk 9
- Supports RR1640 RAID arrays 9
- Chapter 2 10
- RocketRAID 2300 11
- RocketRAID 2302 12
- 2 - LED Connections 13
- 4: D4 14
- 5: +3.3V 14
- 1: D1 14
- 2: D2 14
- 3: D3 14
- LED Connections – RR2304 16
- LED Connections – RR2302 16
- 4 - Verifying Installation 18
- Chapter 3 19
- RocketRAID 230x BIOS Utility 19
- RocketRAID BIOS Utility 20
- 1 - BIOS Command Overview 20
- 2 - Creating RAID Arrays 22
- 3 - Adding/Remove Spare Disks 23
- 4 - Updating the BIOS 24
- Chapter 4 29
- Driver and Software CD 30
- To install the RAID software: 32
- Windows Driver Installation 33
- Overview 34
- 3 - Creating an Array 37
- 4 - Deleting an Array 39
- 5 - Configuring Spare Disks 39
- Verifying an Array 40
- 7 – OCE/ORLM 41
- Device Management 42
- Changing Device Settings 42
- S.M.A.R.T Status 42
- SAF-TE Management 43
- Renaming an Array 43
- 9 - Managing Events 44
- Managing Tasks 45
- Add a Scheduled Task 46
- Linux Driver Support 47
- Modify a Scheduled Task 48
- Delete a Scheduled Task 48
- Add a Connection 49
- Modify a Connection 49
- Delete a Connection 50
- Connect to a Remote System 50
- Disconnect Remote System 51
- System Configuration 51
- Add a User 53
- Delete a User 54
- Set Password 54
- Set Privilege 54
- Chapter 5 56
- Host Adapter 57
- 4 - Updating the Driver 60
- 5 - Uninstalling the Driver 60
- Existing System 62
- Step 1 Update Grub 68
- 4 – Updating the Driver 70
- Chapter 6 71
- FreeBSD Driver Support 71
- Step 2 Install FreeBSD 72
- <-press SPACE key 73
- Step 1 Copy the Driver Module 75
- For FreeBSD 5.x: 76
- Step 2 Test the Driver Module 76
- 3 - Updating the Driver 78
- 4 – Uninstalling the Driver 78
- Appendix 79
- Customer Support 79
Prodotti e manuali riguardandi Controller per unità periferiche Highpoint RocketRAID 2302
(60 pagine)King Canada CT-381FX manuels
Manuels d'utilisation et guides de l'utilisateur pour Outils King Canada CT-381FX.
Nous fournissons des manuels en pdf 1 King Canada CT-381FX à télécharger gratuitement par type de document : Manuel de l'utilisateur
Commenti su questo manuale