Highpoint ROCKETRAID 2340 Guida Utente Scaricare il pdf (Pagina 14)

RocketRAID 2340 Hardware Description/Installation

2-4

4 - Verifying Installation

Once the RocketRAID 2340 host adapter and hard disks have been installed into the

chassis, boot-up the system to verify that the hardware is properly recognized.

1. Power on the system. If the system detects the presence of the adapter, the

RocketRAID 2340 BIOS will be displayed.

2. Press Ctrl+H to access the RocketRAID 2340 BIOS Utility.

The BIOS Utility will display information about hard disks attached to the adapter.

Make sure all attached disks are detected by this utility. If any of the hard disks are

not detected, power down the system and check the power and Mini-SAS cable

connections. Make sure the hard disk in question is securely installed into the

corresponding removable drive tray.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 75 76

Nessun commento

Highpoint ROCKETRAID 2340 Guida Utente Pagina 14